Description

Skyline's CCNP1 Boot Camp course runs at an accelerated pace for six days, Monday thru Saturday, 10 to 12 hours per day, 8:00 AM to 6:00 PM (or later) each day, covering material from the BCMSN v3.0 course and the BSCI v3.0 course. The purpose of this course is to provide the student with adequate knowledge needed to pass two key CCNP certification tests.

If you sign up for both CCNP1 v3.0 & CCNP2 v3.0 at the same time, the price is $9,995.00 for both classes. This gives you a $1995.00 discount off of the prices of the individual classes.

In this course, students will learn how to create an efficient and expandable enterprise network by installing, configuring, monitoring, and troubleshooting network infrastructure equipment (especially Catalyst Multilayer Switches) according to the Campus Infrastructure module in the Enterprise Composite Network model. The campus switched network includes converged IP data, IPC (voice), and Airspace WLAN (Wireless) connectivity.

In this course, students will also learn how to create an efficient and expandable enterprise network by installing, configuring, monitoring, and troubleshooting network infrastructure equipment (especially routers such as Cisco ISRs) according to the Campus Infrastructure module in the Enterprise Composite Network model. The routed network includes the most commonly used and emerging IP routing protocols.

The two weeks of training are covered in 6 days through the elimination of redundant material, extended teach days and emphasis on the important aspects of this technology.

The content, customized by Skyline, will include relevant materials from two Cisco authorized certification courses, including:

• BCMSN
• BSCI

Course Extras

In addition to the standard course materials for each class, attendees will also receive two exam vouchers to take the following exams:

• 642-901 BSCI
• 642-812 BCMSN

Practice tests on the exams are provided on a 128mb USB memory key.

Objectives

See the individual courses for details:

• BCMSN
• BSCI

Prerequisites

Prior to attending this Bootcamp, the student should have:

• Cisco Certified Network Associate (CCNA) certification
• Basic understanding of network connectivity
• An understanding of IP addressing, subnets and DHCP
• VLAN routing and configuration, and TCP networking
• Cisco IOS and Catalyst OS command line interface (CLI) basics

Who Should Attend

Students interested in pursuing a CCNP Certification.

BCMSN v3.0

• Course Introduction
  • Overview
  • Course Goal and Objectives
  • Course Flow
  • Your Training Curriculum
• Module 1: Network Requirements
  • Lesson 1: Introducing Campus Networks
• Module 2: Defining VLANs
  • Lesson 1: Implementing Best Practices for VLAN Topologies
  • Lesson 2: Implementing VLANs
  • Lesson 3: Implementing Trunks
  • Lesson 4: Propagating VLAN Configurations with VTP
  • Lesson 5: Correcting Common VLAN Configuration Errors
• Module 3: Implementing Spanning Tree
  • Lesson 1: Describing the STP
  • Lesson 2: Implementing RSTP
  • Lesson 3: Implementing MSTP
  • Lesson 4: Configuring Link Aggregation with EtherChannel
• Module 4: Implementing Inter-VLAN Routing
  • Lesson 1: Describing Routing Between VLANs
  • Lesson 2: Enabling Routing Between VLANs on a Multilayer Switch
  • Lesson 3: Deploying CEF-Based Multilayer Switching
• Module 5: Implementing High Availability in a Campus Environment
  • Lesson 1: Configuring Layer 3 Redundancy with HSRP
  • Lesson 2: Optimizing HSRP
  • Lesson 3: Configuring Layer 3 Redundancy with VRRP and GLBP
• Module 6: Wireless LANs
  • Lesson 1: Introducing WLANs
  • Lesson 2: Describing WLAN Topologies
  • Lesson 3: Explaining WLAN Technology and Standards
  • Lesson 4: Configuring Cisco WLAN Clients
  • Lesson 5: Implementing WLANs
  • Lesson 6: Configuring WLANs
• Module 7: Configuring Campus Switches to Support Voice
  • Lesson 1: Planning for Implementation of Voice in a Campus Network
  • Lesson 2: Accommodating Voice Traffic on Campus Switches
• Module 8: Minimizing Service Loss and Data Theft in a Campus Network
  • Lesson 1: Understanding Switch Security Issues
  • Lesson 2: Protecting Against VLAN Attacks
  • Lesson 3: Protecting Against Spoof Attacks
  • Lesson 4: Describing STP Security Mechanisms
  • Lesson 5: Preventing STP Forwarding Loops
  • Lesson 6: Securing Network Switches

• Course Introduction
  • Overview
  • Course Goal and Objectives
  • Course Flow
  • Additional References
  • Your Training Curriculum
• Module 1: Network Requirements
  • Lesson 1: Describing Network Requirements
• Module 2: Configuring EIGRP
  • Lesson 1: Introducing EIGRP
  • Lesson 2: Implementing and Verifying EIGRP
  • Lesson 3: Configuring Advanced EIGRP Options
  • Lesson 4: Configuring EIGRP Authentication
  • Lesson 5: Using EIGRP in an Enterprise Network
• Module 3: Configuring OSPF
  • Lesson 1: Introducing the OSPF Protocol
  • Lesson 2: OSPF Packet Types
  • Lesson 3: Configuring OSPF Routing
  • Lesson 4: OSPF Network Types
  • Lesson 5: Link-State Advertisements
  • Lesson 6: Configuring OSPF Route Summarization
  • Lesson 7: Configuring OSPF Special Area Types
  • Lesson 8: Configuring OSPF Authentication
• Module 4: The IS-IS Protocol
  • Lesson 1: Introducing IS-IS and Integrated IS-IS Routing
  • Lesson 2: Performing IS-IS Routing Operations
  • Lesson 3: Configuring Basic Integrated IS-IS
• Module 5: Manipulating Routing Updates
  • Lesson 1: Operating a Network Using Multiple IP Routing Protocols
  • Lesson 2: Configuring and Verifying Route Redistribution
  • Lesson 3: Controlling Routing Update Traffic
  • Lesson 4: Implementing Advanced Cisco IOS Features: Configuring DHCP
• Module 6: Implementing BGP
  • Lesson 1: Explaining BGP Concepts and Terminology
  • Lesson 2: Explaining EBGP and IBGP
  • Lesson 3: Configuring Basic BGP Operations
  • Lesson 4: Selecting a BGP Path
  • Lesson 5: Using Route Maps to Manipulate Basic BGP Paths
• Module 7: Implementing Multicast
  • Lesson 1: Explaining Multicast
  • Lesson 2: IGMP and Layer 2 Issues
  • Lesson 3: Explaining Multicast Routing Protocols
  • Lesson 4: Multicast Configuration and Verification
• Module 8: Implementing IPv6
  • Lesson 1: Introducing IPv6
  • Lesson 2: Defining IPv6 Addressing
  • Lesson 3: Implementing Dynamic IPv6 Addresses
  • Lesson 4: Using IPv6 with OSPF and Other Routing Protocols
  • Lesson 5: Using IPv6 with IPv4

Lab Outline

BCMSN v3.0

• Quiz 1-1: Describing the Campus Infrastructure Module
• Lab 1-2: Getting Started with Cisco Catalyst Equipment
• Lab 2-1: Configuring VLANs and VTP
• Lab 3-1: Configuring Primary and Backup Root Bridges
• Lab 3-2: Implementing PVRST
• Lab 3-3: Implementing MST
• Lab 3-4: Configuring EtherChannel
• Lab 3-5: Troubleshooting Spanning Tree
• Quiz 4-1: Describing Routing Between VLANs
• Lab 4-2: Routing Between VLANs
• Lab 5-1: Enabling and Optimizing HSRP
• Lab 6-1: Configuring Switches for WLANs
• Lab 6-2: Setting Up the WLAN Controller
• Lab 6-3: Configuring the Controller via the Web Browser
• Lab 6-4: Configuring a Wireless Client (Optional)
• Lab 7-1: Configuring IP Telephony Support
• Case Study 8-1: Applying Security Practices to Secure Devices in the Campus
• Case Study 8-2: Using Security Tools to Secure Devices in the Campus
• Lab 8-3: Applying Security Tools

• Lab 2-0: Basic Configuration
• Lab 2-1: Configuring and Tuning EIGRP
• Lab 3-1: Configuring Single-Area OSPF
• Lab 3-2: Configuring OSPF for Multiple Areas and Frame Relay Nonbroadcast
• Lab 3-3: Configuring OSPF for Multiple Areas and Frame Relay Point-to-Multipoint and Point-to-Point
• Lab 3-4: Tuning OSPF
• Lab 4-1: Configuring Integrated IS-IS
• Lab 5-1: Configuring Basic Redistribution
• Lab 5-2: Tuning Basic Redistribution with Cisco IOS Tools
• Lab 6-1: Configuring Multihome BGP
• Lab 6-2: Manipulating BGP Path Selection with Route Maps
• Lab 7-1: Configuring Multicast Routing
• Lab 8-1: Configuring IPv6 Addresses
• Lab 8-2: Enabling IPv6 OSPF Routing
• Lab 8-3: Configuring IPv6 Tunnels